Black Swan PVC Solvent Cement 236ml is a fast-set, high-strength solvent cement designed for joining PVC pipe and fittings. It’s a reliable choice for plumbing and maintenance work where you need a secure joint and a clean finish.
PVC solvent cement works by softening the surfaces of the pipe and fitting so they fuse together as the joint cures. This makes it suitable for permanent PVC joints when used correctly and allowed to cure fully before the system is put back into service.
Typical uses
- Joining PVC pipe and fittings during plumbing installations
- Repairs to existing PVC pipework (where a solvent-weld joint is required)
- General trade and DIY maintenance work using PVC fittings
Key features
- 236ml tin – a practical size for repairs and small-to-medium jobs
- Fast set – helps reduce waiting time between stages of the job
- Brush in lid – controlled application with less mess
- For PVC – intended for PVC pipe and fittings
Application (best practice)
- Ensure the pipe and fitting are clean, dry and correctly sized.
- Apply an even coat to the fitting and pipe end.
- Push fully home and hold briefly to prevent “push-out”.
- Allow adequate cure time before running water or pressure testing.
Important: This product contains flammable solvents. Use in a well-ventilated area, keep away from heat/sparks/open flames, and wear suitable eye protection and gloves. Always read the label and safety information before use.
| Brand | Black Swan |
|---|---|
| Type | PVC solvent cement |
| Size | 236ml |
| Suitable for | PVC pipe & fittings |
| Application | Solvent weld jointing |
| Applicator | Brush in lid |
| Product Type | Solvent Cement / Adhesive |
| Pack Size | Single |
| Material | PVC |
| Connection Type | Solvent Weld |
Be the first to review “Black Swan PVC Solvent Cement 236ml – Fast-Set Adhesive for PVC Pipes & Fittings”
Q: What is Black Swan PVC Cement used for?
A: It’s used for solvent welding PVC pipe and fittings to create a strong, permanent joint.
Q: Can I use it on ABS or other plastics?
A: It’s intended for PVC. For ABS or other plastics, use the correct cement for that specific material.
Q: Does it include a brush?
A: Yes, the tin typically has a brush in the lid for neat, controlled application.
Q: How do I apply it?
A: Ensure the pipe and fitting are clean and dry, apply an even coat to both surfaces, assemble immediately and hold briefly to prevent push-out.
Q: When can I run water or pressure test?
A: Allow adequate cure time before putting the system into service. Cure time depends on pipe size, temperature and conditions.
Q: Any safety notes?
A: Contains flammable solvents. Use in a well-ventilated area, keep away from ignition sources, and wear eye/hand protection. Always read the label before use.
Related products
Reviews
There are no reviews yet.